2PWT

The 2PSWT is a basic two position homing and sequencing video switcher. The front panel controls consist of a 3 position toggle switch for homing to either camera 1 or 2 or setting the dwell time via a recessed pot in the front panel. The dwell time can be set from approximately .2 seconds to 1 minute. The 2PSWT is powered by 9-12VDC and is supplied with a UL approved wall transformer.

4PSWT

The 4PSWT is a four position alarming, homing, bypassing sequential video switcher. One alarm input via a rear cage clamp connector allows homing to camera 4 in a manual mode. Upon release of the alarm input, the switcher continues from where it left off prior to the alarm occurrence. Front panel LED indicators show which camera is currently being homed. The three position toggle switches allow instant manual homing, camera bypassing except upon alarm, and auto sequencing mode. There is a recessed Dwell pot on the front panel to adjust the dwell time from approximately 1 second to 30 seconds. The 4PSWT is powered by 9-12VDC and is supplied with a UL approved wall transformer.

8PSWT

The 8PSWT is an eight position alarming, homing, bypassing sequential video switcher. Two alarm inputs via rear cage clamp connectors allow homing to camera 4 or camera 8 in a manual mode. Upon release of the alarm inputs, the switcher continues from where it left off prior to the alarm occurrence. Front panel LED indicators show which camera is currently being homed. The three position toggle switches allow instant manual homing, camera bypassing except upon alarm, and auto sequencing mode. There are two separate recessed Dwell pots to control the dwell time of cameras 1-4 and 5-8 independently. The 8PSWT is powered by 9-12VDC and is supplied with a UL approved wall transformer.