R16 Adapter (for XRS series)
Remote adapter for remote control of 16 additional relays (e.g. for lighting, door control systems, etc.)
Hybrid Card 4
Plug-in module for AVE MVDR-10HY for adding up to 4 analogue cameras (PAL/NTSC) (in place of IP cameras). Plug-in of up to 2 'HYBRID Card 4' in AVE MVDR-10HY
Note: The HYBRID Card 4 is delivered separately along with instructions for fitting into the AVE MVDR-10HY device. When using the HYBRID Card, the maximum possible number of IP cameras is reduced by the number of analogue cameras used.
PSTN Modem for analogue transmission with Chain Watch. Applicable for main connections to the public telephone network or within an interphone system. Dialling Mode: DTMF, Impulse; Transmission Mode V.32; max. Transmission rate 33600 Bit/s
Note: The PSTN Card is delivered separately along with instructions for mounting into Chain Watch devices.
Plug in ISDN module with S0/I.430 interface for transmission via 1 B channel
Note: ISDN card is delivered separately with instructions for on-site installation into Chain Watch devices 180.00
Audio Card (for XRS series)
Plug in Audio module for bidirectional transmission of digital audio signals in voice quality
Note: Audio card is delivered separately with instructions for on-site installation into Chain Watch
19" Mount Kit (2RU)
Installation kit for 19" mounting of up to two SVR series devices, AVE MVDR-10HY and Trans Watch(2 RU)
19" Mount Kit (1RU)
Installation kit for 19" mounting of one device (1 RU)
Two-part installation kit for horizontal and vertical mounting in vehicles as well for strain-relief; suitable for XRS series or Trans watch
Adapter for connection of Cam4mobile to an integrated on-board information system (IBIS), e.g. in busses or trains. The IBIS adapter can be used a.o.t. to synchronize the Trans Watch system time with the IBIS system time. More IBIS data sets: Date, Time, Wagon- number, Line, Curs, Stop
PC Kit AVE MVDR-10HY USB
External housing with USB connection for device-independent evaluation of AVE MVDR-10HY removable hard disks (i.e. for use with laptop computers)
PC Kit CWXR USB
External housing with USB connection for device-independent evaluation of Chain Watch/Trans Watch removable hard disks (i.e. for use with laptop computers)
USB/Serial Adapter Cable
Adapter cable to give PCs and laptops fitted with only a USB interface a connection to serial devices such as null modem cable/modem etc.
4x Interface Card MOXA
4x interface card (PCI) for CWXR PRO connecting up to 4 ISDN-TAs or analogue modems
8x Interface Card MOXA
8x interface card (PCI) for CWXR PRO connecting up to 8 ISDN-TAs or analogue modems, with active on-board processor for discharge of the CPU of the PC
ISDN TA PPX (Euro ISDN, national ISDN, 1 B channel)
An ISDN terminal adapter is required for connecting image transmitters or receiver PCs via ISDN-S0 based connections to public telephone networks.
Router C 1500h
The Router is highly suited for mobile applications in combination with Cam4mobile.
Depending on the network signal strength the router automatically switches between UMTS (3G), HSUPA, HSDPA or GPRS and therefore offers in combination with CW Link® and AVE systems (e.g. Trans Watch) intelligent and fully automated backup management of the data transmission path.
Supports data transmission rates of up to 1.8 Mbps downstream and 384 kbps (up to 2 Mbps using HSUPA) upstream.
Note: Delivered without SIM card. This part is subject to export control.
Router C 1500hw
Specifications as per C 1500h model, but includes additional WLAN module.
Note: Delivered without SIM Card. The article is subject to export control.
Siemens TC35i, Dual Band GSM Modem for wireless transmission (900 and 1800 MHz) of Chain Watch/ Trans Watch to GSM networks. The TC35i Modem establishes connections for video transmission to the GSM network. The receiving PC has to be connected via PSTN, ISDN or GSM.
Housing: 75 x 64 x 33 mm; operating voltage: 8 to 30 V
Note: Please pay attention to necessary accessories, e.g. power supply, antenna, SIM card